This course is basically designed for beginners like undergraduate students who wants to enter in Microwave Engineering field. This course aims at teaching of Analysis of S parameters and Design and Analysis of Microwave Transmission lines. S-parameters (also called S-matrix or scattering parameters) represent the linear characteristics of RF electronic circuits and components. From the S-parameter matrix, you can calculate characteristics of linear networks such as gain, loss, impedance, phase group delay, and voltage standing wave ratio (VSWR). A transmission line is a connector which transmits energy from one point to another. The study of transmission line theory is helpful in the effective usage of power and equipment.
There are basically four types of transmission lines −
Two-wire parallel transmission lines
Coaxial lines
Strip type substrate transmission lines
Waveguides
While transmitting or while receiving, the energy transfer has to be done effectively, without the wastage of power. To achieve this, there are certain important parameters which has to be considered.
Main Parameters of a Transmission Line
The important parameters of a transmission line are resistance, inductance, capacitance and conductance.
Resistance and inductance together are called as transmission line impedance.
Capacitance and conductance together are called as admittance.
Resistance
The resistance offered by the material out of which the transmission lines are made, will be of considerable amount, especially for shorter lines. As the line current increases, the ohmic loss (I2Rloss) also increases.
Inductance
In an AC transmission line, the current flows sinusoidally. This current induces a magnetic field perpendicular to the electric field, which also varies sinusoidally. This is well known as Faraday's law.
Conductance
There will be a leakage current between the transmission line and the ground, and also between the phase conductors. This small amount of leakage current generally flows through the surface of the insulator. Inverse of this leakage current is termed as Conductance. It is denoted by "G".
Capacitance
The voltage difference between the Phase conductors gives rise to an electric field between the conductors. The two conductors are just like parallel plates and the air in between them becomes dielectric. This pattern gives rise to the capacitance effect between the conductors.
Coupons are issued by instructors to promote their courses, gain traction and reach momentum. The instructor can choose to emit discounted (ex: $11.99 coupon) or 100% off coupon (you pay nothing). Each coupon becomes expired when emitted quota is over (1000 enrollments) OR expiration date has been reach (5 days).
For a coupon, number of activation are now capped to 1000 max. This means that it can be activated only a 1000 times, and then it expires; or reach its expiration date; whatever happens first.
We have no contact with instructors, and only instructors can emit coupons. You can try to directly contact the instructor finding his/her Twitter/Facebook, and ask him/her for a coupon, but at our level, we cannot help, sorry.
We have an affiliate contract with Udemy and we may receive a commission when you purchase through some of the affiliate links on this website. But this website is not a part of the Udemy Inc. Additionally, this website is NOT endorsed by Udemy in any way. Udemy is a trademark of Udemy, Inc. `